SE2015000

PIR Sensor Switch

SE2015000

PIR Sensor Switch

The PIR sensor switch is for use inside a cabinet or wardrobe. The large detection range means the sensor can be positioned at the back of the cabinet if required.

Priporočena lokacija

Description

The PIR sensor switch is for use inside a cabinet or wardrobe. The large detection range means the sensor can be positioned at the back of the cabinet if required.

Možnosti naročanja
Možnosti naročanja
 Kataloška številkaTransformatorMočStockRRPQty
SE2015000Zelena, modra1.25WIn Stock£33.44
Opis izdelka
Opis izdelka
  • Zaključni slojAluminij

    Namig

  • Dolžina kabla1,5 metra

    Namig

Ključne točke

> Suitable to be used with 12V or 24V products without an integrated sensor.

> Works as an on/off switch for lighting installed inside cabinets or wardrobes. Mount in a side panel or back panel of an internal unit.

> Small and discreet product.

> Sensor has a 1.5m cable to the sensor, a 300mm cable with JB4 plug to connect to the driver and a 4 port JB4 distribution block for light connection.

> A dial on the front of the sensor unit allows you to select the time delay on the sensor (from 10 seconds to 3 minutes).

> 80 ° detection angle.

> 0.5m - 2.5m detection range.

> Can be used in kitchens or bedrooms.

> Requires a 20mm hole-cut

Prenos
Prenos
Dodatki
Dodatki
10.1008.0600
x

Delite moč transformatorja z močjo ene luči, ki jo želite priključiti in dobili boste število luči, ki jih lahko priključite na en transformator

Primer: 15W transformator s 3W lučmi 15 ÷ 3 = 5 luči

Transformatorji so na voljo v različnih izvedbah. Izbira transformatorja je odvisna od števila luči, ki jih želite priključiti.

Transformatorji imajo omejeno število vhodov na priklopnem razdelilcu. Priklopni razdelilec s 6 vrati omogoča priklop največ 6 luči.

Pri izbiri je potrebno upoštevati tako skupno moč luči, kakor tudi število vhodov na priklopnem razdelilcu