SE40515

In-Cabinet PIR Sensor Switch

SE40515

In-Cabinet PIR Sensor Switch

The PIR sensor switch is for use inside a cabinet or wardrobe. Wire this sensor to the internal lights and as the door opens the sensor will detect the movement and switch all connected lights on. The detection range of this product is 0.5-2.5m meaning it can be mounted as required in the cabinet or wardrobe.

Priporočena lokacija

Description

The PIR sensor switch is for use inside a cabinet or wardrobe. Wire this sensor to the internal lights and as the door opens the sensor will detect the movement and switch all connected lights on. The detection range of this product is 0.5-2.5m meaning it can be mounted as required in the cabinet or wardrobe.

Možnosti naročanja
Možnosti naročanja
 Kataloška številkaDoseg delovanjakategorijaMaksimalna močStockRRPQty
SE405150.5-2.5mD250WExpected 09/05/2019£29.64
Opis izdelka
Opis izdelka
  • Zaključni slojAluminij

    Namig

  • Dolžina kabla1,5 metra

    Namig

Ključne točke

> Discreet in-cabinet motion sensor switch.

> Works as on/off switch for lighting installed inside cabinets or wardrobes.

> Mount in a side panel or back panel of an internal unit.

> Dial on front of sensor allows you to select how long the lights will stay on for (from 10 seconds to 3 minutes).

> Detection range - 0.5m-2.5m.

> 80° detection angle.

> Discreet fitting.

> Does not require a JB4 connector.

> Compatible with 12V, 24V & 240V products.

> Silver finish.

Najbolj pogosta vprašanja o izdelku
Najbolj pogosta vprašanja o izdelku

Does 'boxing in' the receiver affect the detection range of the remote control?

It depends on the material which the receiver is positioned behind. Wood for example does not affect the detection range, however metal will reduce the detection range to a degree. The detection range will also be affected if enclosed within a wall.

Can sensors be used in the bathroom?

No. Our sensors are not IP rated so therefore they need to be installed outside the bathroom.

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Oglejte si še več najbolj pogostih vprašanj (1)
Prenos
Prenos
x

Delite moč transformatorja z močjo ene luči, ki jo želite priključiti in dobili boste število luči, ki jih lahko priključite na en transformator

Primer: 15W transformator s 3W lučmi 15 ÷ 3 = 5 luči

Transformatorji so na voljo v različnih izvedbah. Izbira transformatorja je odvisna od števila luči, ki jih želite priključiti.

Transformatorji imajo omejeno število vhodov na priklopnem razdelilcu. Priklopni razdelilec s 6 vrati omogoča priklop največ 6 luči.

Pri izbiri je potrebno upoštevati tako skupno moč luči, kakor tudi število vhodov na priklopnem razdelilcu